Products | 3R TQC
3R TQC
Advantages
Quickness - measuring usually takes less than 1 second; even shorter measuring time is possible.
Accuracy - The accuracy is on the same level with traditional testing methods (tensile test, hardness test, ...)
Non-destructiveness - Thanks to 3R TQC a 100 percent incoming and outgoing inspection of material properties can be performed also in situations where it had not been possible or where it had been too expensive. It enables also continual quality recording.
Sensitivity and reliability - The usage of a multi-frequency eddy-current measuring method together with special mathematical models and highly efficient algorithms ensures high sensitivity and reliability.
Simplicity and user-friendliness - Simplicity was one of the important aspects which were taken into account during the development of the 3R AMI software. User-friendliness belongs to our most important criteria.
Principle - a multi-frequency eddy-current measuring method is used for data acquisition. The method is suitable with all electrically conductive and/or magnetic materials. The obtained measured data are automatically processed with integrated mathematical models and algorithms.
Target values - Among the characteristic measured values belong mechanical material values, e.g. yield strength, breaking strength, uniform elongation, elongation at break, hardness etc., as well as the testing of the individual structural constituents of materials.
Hardware - the 3R TQC system was developed by 3R Technics specifically for the eddy current device MAGNATEST® D from the Foerster Company . The software enables a non-destructive measurement of strength, hardness or other material properties.
Applications - Both static and dynamic measurements are possible. The tested material can be of various shapes: from plates and strips of sheet metal through wires, rods and pipes to various profiles and parts.